10 3.2 data reset after upgrade note during the upgrade process, some system data will be cleared, including ogm. 3.2 data reset after upgrade 1. the reset indicator will flash on the panel to indicate that the kx-tda is being reset. 2. after reset, the system data will be initialized to its default values. 1. in the pbx, go to the utilities menu and select maintenance console. select update from the maintenance console menu. the following window will be displayed. click yes. 4. after the update is complete, the interface will be updated. 5. a message will be displayed to confirm that the change has been made. select maintenance console from the menu. select reset from the menu. select yes. 6. note some user data is cleared during the reset process, including outgoing messages (ogms). before resetting the pbx, be sure to back up ogms to a pc using maintenance console. for a list of all items cleared during reset, see 2.5 data reset after reset. note certain user data is cleared during the reset process, including outgoing messages (ogms). before resetting the pbx, be sure to back up ogms using maintenance console.
14 4.1 procedure 5. slide the system initialise switch to the system initialize position. kx-tda30 reset button system initialise switch kx-tda100/kx-tda200 reset button system initialize reset normal system initialise switch 6. turn on the power to the pbx. 7. while the run indicator is flashing, slide the system initialise switch back to the normal position. 3c. run quick setup. 1. connect to the pbx using maintenance console. a message will be displayed asking if you want to replace the language file and default value file on the sd memory card with the data stored on the pc. 2. click ok. the new version language file and default value file for your country or area will be transferred from the pc to the sd memory card. when these files have been transmitted, the following message will be displayed: please initialise reset the pbx 8. the pc will automatically disconnect from the pbx. it is not necessary to reset the pbx. 4. reconnect to the pbx using maintenance console. quick setup will restart automatically. 5. set the data items as prompted. quick setup will finish. if the contents of the sd memory card have not been previously backed up to the pc using an sd memory card reader, it is strongly recommended to back up the feature access file after quick setup is complete. follow the procedure below: sd memory card installation/upgrade guide 14 3d9ccd7d82